1300 416 313 | Servicing Sydney, Melbourne & Brisbane
decontaminated and transported

Cold Cutting Abrasive

Project Details

Cold Cutting
Hitech Industrial Services were contracted on a project which involved the cutting of small manholes to 52 tanks both above and below ground to enable cleaning and decommissioning. Over a period of two months with a 2-3 person field team working, the process was assessed by Hitech’s technicians to benefit by using a cold cutting technique. This evaluation was made based on the type of highly flammable and poisonous contaminants in the tank and this method would eliminate any potential for ignition in a potentially volatile environment. The client also was required to minimise dust and debris emissions which the cold cutting process was able to fulfil. Once the manholes were cut and chemicals removed, the internal of each tank needed to be cleaned using high-pressure water. Hitech used Cold Cutting to safely complete the job as it was the only method that did not create sparks, eliminating any explosions, fire and pollution.

Gallery

More Projects

pool after removing the coating

Pool Coating Removal in CBD Sydney

As the images show this CBD pool in Sydney was in a busy location and our client was keen that the project was undertaken as efficiently and expediently as possible.

Read more
surface preparation pool image

Regional NSW – Swimming Pool Surface Preparation

Our client requested a methodology that could remove paint and built up coating to be removed during winter when the normally busy public pool and associated learners pool would be closed and renovated.

Read more
Head Office: 3 Watsford Road, Campbelltown NSW 2560


Melbourne Branch Office: Ground Floor 435 Nepean Highway, Frankston VIC 3199

Phone: 1300 416 313
Email: info@hitechindustrial.com.au
© 2020 Hitech Industrial Services
Follow us
All Rights Reserved 2020